3/4 Pusher Seals for Steel Strapping 2000/Case Style II Has a rear hanger for

Has a rear hanger for versatility to hang securely on louvered panels or rails

1 roll per case

one side white

Manufactured from expanded polystyrene - 0

Machine "reads" the air cushioning film and automatically sets the correct air fill pressure and sealing pressure

3/4 Pusher Seals for Steel Strapping 2000/Case Style II Has a rear hanger forFor use with steel strap, our pusher seals are galvanized for rust prevention. (See also Open Seals). Simple Instructions: First slide a pusher seal (listed below) on your steel strap, manually wrap the steel strap around the load feeding the end of your strap through the seal as well, tighten the top layer steel strap in the seal with our pusher tensioner, next crimp the seal with a single notch sealer, and finally cut the excess strap with our steel