UHMW Wear Pads (6 pcs) Use an allen wrench (usually

Use an allen wrench (usually 5/32" or 4mm) to remove the original wear pads

1/2" rear gap fill)

Now available in the following configurations

This allows the U-Cup to fit snug in the proper position and keeps it from sliding front to back or side to side

2mm rear gap fill)

UHMW Wear Pads (6 pcs) Use an allen wrench (usuallyU Cups come standard with HDPE wear pads. However, if you are using a barbell with aggressive knurling, we recommend using these UHMW wear pads. (Keep in mind: we have thoroughly tested the HDPE pads with a Rogue Ohio bar for over 2 years and counting. There are only scuff marks on the pads. No depth wearing at all). They are compatible with 3" wide U Cups. Each set sold in pairs (6 pads total): 2 back bracket pads 2 front bracket pads 2 bottom pads