Roll Cage CITROËN Saxo (Phase 1/2 ) 3-doors Hatchback BOLT IN V3 BMW VW SHARAN (7N)

VW SHARAN (7N)

0TDI 09/08 - 2017

Installed instead of swirl flaps in the intake manifold

45"] (for aftermarket pressures it must fit under the factory BMW flywheel) you can use the pressures from:

Chevrolet C20 Suburban 396 V8 CARB 1968-1969 Hi Perf

Roll Cage CITROËN Saxo (Phase 1/2 ) 3-doors Hatchback BOLT IN V3 BMW VW SHARAN (7N)This Roll Cage is manufactured according to FIA Appendix J in the following versions: Citron Saxo 1. 6 VTS AST Bolt In V3 roll cage with 6 points to the bodyshell, screwed onto 6 reinforcement plates welded to the bodyshell. These reinforcement plates are made of 3mm thick steel and are designed and manufactured specifically for each car, achieving maximum safety and fitting on the chassis. The roll cage is delivered welded and unpainted, and consists